PROIEKT GROM KAMEN

PROIEKT GROM – KAMEN (“The THUNDER STONE Project”)

This project is about one of the most advanced machine mankind can built on Earth in order to run advanced physcis experiments. Is the ultimate machine – capable to generate for a very brief sequence a neutron star or even if a nano-nano-nanometrical micro black hole! I hesitated long long time to publish this project but a recent article on internet obliged me to share my knowledge in this area: https://www.theguardian.com/science/2019/jan/15/cern-draws-up-plans-for-collider-four-times-the-size-of-large-hadron

PROIEKT GROM KAMEN is about a very large and extremely complex project and hereby – on this site – just I place a very very brief description of the project – let’s to say “a draft of the draft of the project”. In fact I am need at least 2 months for a full description of the project and hundred of pages in order to cover at least the main experiments which can be run inside this amazing project. This project is dedicated to the Heroes of Leningrad which shows their incredible determination during the 900 days city siege inside WW2. And because of my limited available time barely I mentioned hereby the experiment “TANIA SAVICHEVA”.

Reading the above mentioned article and further reading other materials I found that Europe is ready to waste more than 20 billion euro for a hadron collider just bigger than the existing one … and nothing else. Nobel winners from Europe should acknowledge European nations that this machine is NOT able to replicate any of true states of matter found inside ordinary stars nor from neutron stars. In fact any collider just will collide ions at very high energies – in this case more than 100 Tev particles in order to obtain new particles …. and nothing else. This kinda of machine are not able even if to generate the true conditions from our Sun – with absolutely all parameters – density , temperature, rate of PEP fusions and so on….

Good understanding of matter as per Standard Model description is happened far better inside PROIEKT GROM KAMEN where the baryonic matter itself is compressed in order to replicate EXACTLY the conditions from our Sun, from very large (giants) stars and even if from a neutron stars. My proposal is NOT to built larger hadronic colliders but to built such machines able to replicate shot after shot the most extreme states of the matter which can be found around us in the observable Universe.

During my work at PROIEKT KOLIMA I finished 5 types of nuclear “lasers”. From all these laser type “SARATOV” I found to be the most suitable one in order to be part of GROM KAMEN PROIEKT – experiment SAVICHEVA. All “shots” under experiment SAVICHEVA are done by using a nuclear “laser”. Such “laser” is able to accelerate up to the speed of light either a gold bullet or a micron foil of around 5 mm diameter in order to obtain even if a one femtosecond intense light pulse.

Laser SARATOV is about a 1,785 kg nuclear device able to generate a gamma ray laser of 28 Gj energy for a brief sequence of 14 picosecond over an area of 2,000 square microns – with other words capable to develop 1 x 10²⁶ W/cm2.

Description of devices:

In the wonderful and remote Sibir a large underground facility is required in order to run experiments from PROIEKT GROM KAMEN.

The base of PROIEKT GROM KAMEN is the concept design of a femtosecond high burst of energy.

We need a 240 meters diameter spherical chamber which holds inside another spherical chamber of inner size of 112 m and outer diameter of 148 meters and thus with walls of 18 m thick made by reinforced concrete. With other words we have two spherical chamber – one disposed inside a larger one. In the outer chamber 2,432 Saratov lasers acting based to explosives and powerful electrical discharges are releasing abt. 540 Tj from which only abt 68Tj are used in order to accelerate to relativistic speed (1 GeV energies) about 100 mg of matter. An advanced 24 meters long barrel is used by each laser to concatenate, focusing and accelerating around 40 micro grams of gold at speed of light. All these 2,432 barrels are passing through the concrete walls of inner spherical chamber and are getting out from walls each inside the center of a hexagonal 4,4 m diameter mirror f/12.8. Thus we have 2,432 targets and each target will be placed in the first focus point of each elliptical hexagonal mirror. The accelerated gold plasma bullets are hitting with the speed of light a gold target nested inside 2 cm diameter half sphere xenon fluoride crystal which is disposed precisely in the first focus point of each mirror. After impact we have a peak of 12 femto-seconds gamma ray flash of light partially shifted to 180 nm light by solid xenon scintillation. The inner chamber will have a high degree of vacuum with traces of helium. Practically all round the inner side of internal 112 m diameter spherical chamber there are disposed 2,432 mirrors with a total surface of 41,200 m2 and which will receive each the flash light from their own target and further will focus this light over a tinny spherical diamond of 3,8 mm diameter. We have to use this type of mirrors as a reliable and precise method of light energy transfer. The second focus point of each mirror will be beyond the geometrical center of diamond sphere and the diameter of each mirror spot will be ½ from sphere diameter for an overlapping factor of x68. This overlapping will assure a near to perfect spherical compression of diamond sphere with a deviation less than 24 femtometers of diamond surface evolution. The surface of this diamond sphere itself should be under 1 nm deviation – with other words a true master piece of engineering. This very smooth surface, the homogeneity of synthetic diamond and the overlapping of mirrors flash will assure that the entire energy system will be focused inside a sphere of abt 32 nanometres diameter.  With other words the accelerated neutrons, electrons and protons will be compressed uniformly in such small sphere. The disposal of mirrors inside strong concrete walls of inner chamber will assure us that these mirrors will not be damaged by the explosives used by SARATOV lasers. The only one connection of the outer chamber with the inner chamber is a less than 20 millimeters diameter and 22 meters long barrel used to guide and accelerate to speed of light the small gold plasma bullets. The energy of light of 8,75 Tj is focused over little diamond sphere in order to obtain an intensity up to 5 x 10²⁶ W/cm2 and thus dozens of TeV energies of both protons and neutron toward the geometrical center of sphere. Protons are quickly transformed via EPC in neutrons and thus we obtained a neutron star and further a possible micro black hole star. Our little neutron star will last around 80 yoctoseconds and Pev neutrons will be released.

Cooling the inner spherical chamber is mandatory in case of higher releases of energy. The most powerful shots can deposit in said chamber up to 8,65 Tj of energy which must be quickly removed in order mirror and concrete structure itself to not be melted. We can have at least two cooling systems:

• One cooling system for mirrors which is called to keep the temperature of reflective aluminium layer under 120 Celsius degrees – far below the softening point of aluminium. The reflective aluminium layer is deposited over a 20 microns transparent LiF glass which is deposited over a 1 mm black carbon nano-tubes layer (carbon nano-tubes “forest”) which is deposited over the body of the mirror itself which is also transparent and has embodied a cryogenic cooling mechanism closed to the surface. This rigid carbon layer is called to absorb extremely fast the radiation of aluminium layer and this heat will be purged out of inner spherical chamber by the cryogenic liquid with a debit of 170 liters per second per mirror.

• Another cooling system is disposed as honeycomb structure around each nirror with a length up to 32 meters – just 18 meters far away from the center of the inner sphere. This structure has a weight of 3,622 tones and is composed by at least 20 micronic carbon foils disposed on each side of the structure.The total surface of this foils is about 10,4 million square meters and the temperature of these foils can touch even if 3,200 Celsius degrees. In order these foils to work the spherical chamber itself must be filled with a mixture of 50-50 percents of of hydrogen and xenon but of course other gases can be used. At least one type of these gases should be also used around the target for gold relativistic bullets because the mirrors are built to be highly reflective for a specific spectrum by using advanced dielectric coatings.The mechanism is quite simple – the relativistic neutrons and gamma photons will be moderated by the gases from the inner chamber and the light emitted isotropically will arrive mainly on the surface of carbon foils which being very thin are transferring very fast each other the energy received as light. Practically in less than a millisecond we got a true furnace inside inner spherical chamber – furnace which of course should be cooled rapidly by pumping about 830 tones per second of cooling agent. The mirrors will be irradiated by the Cherenkov radiation but also by the carbon foils.

Both cooling systems are very expensive and even if with it installed the mirrors should be re-coated from time to time. Another option is just to install inside the mirrors a powerful cooling system to prevent the ceramic body of each mirror to not be damaged and after each shot ALL mirrros to be re-aluminized. In this case a special platforme should come from above inside the center of the sphere in order – in the same time – 6 mirrors to be re-coated inside a special vacuum chambers. The main drawback of this design is that is time consuming – no more than 10 “shots” per year can be run but the main advantage will be the vacuum from the inner spherical chamber. Of course if we have a duplicate set of 2,432 mirrors these can be installed in 4-5 days and after each shot will be replaced immediately by a new fresh set of mirrors already aluminized and coated with a protective transparent micronic glass layer.

Summary:

2,432 gold plasma bullets of 40 micrograms each are hitting with speed of light 2,432 targets disposed in the first focus point of 2,432 hexagonal elliptical mirrors in order to obtain a light flash with a peak of about 12 femtoseconds. Part of this light flash is than focused by these mirrors with the intensity of light pressure of 5 x 10²⁶ W/cm2 over a tinny diamond sphere of 3,8 mm diameter and 100 mg weight. Electrons are accelerated up to 80 Pev energies and neutrons/protons are accelerated up to 40 TeV energies but because of spherical convergence energy is amplified by a factor of at least x1,000 and thus we can obtain 40 PeV equivalent neutron compression energies and we can obtained a neutron little star of 32 nanometres diameter and with a density up to 5,8 x 10¹⁵ grams per cm3 or  5,8 x 10¹⁸ kg/m3 – at least 10 times greater density than an average neutron star. The confinement time of our little neutron star will last than 10^-23 seconds and thus we have a yoctosecond event neutrons burst of energy.Large area of inner mirrors and disposal of this mirrors inside a strong concrete sphere will assure us that this project can run hundred and hundred of shots without damaging the mirrors.From time to time only the transparent hard ceramic coating should be repaired and the mirrors should be re-aluminized.

One question rise up quickly – Why the relativistic gold bullets are not allowed to hit the diamond sphere? There are two main explanations:

• because I see no available technology which to allow us to keep together the gold atoms without it dispersion – the relativistic gold plasma quickly will expand once getting out from channels and these channels are so many – so is impossible to bring it closed to the surface of diamond sphere.Also if we accept some dispersion of gold plasma we will got a severe difference at impact by gold atoms – the outer bullet atoms from jets will hit later the diamond sphere and also an uncontrollable burst of light generated by the friction of outer gold attoms  will affect the iner side atoms.
• no matter how much care we will pay is impossible to obtain a near to prefect synchronous impact of 2,432 gold bullets and thus a near to perfect compression of diamond sphere. Overlapping by a factor x68 is the guaranty of a smooth compression. At the speed of light even if a minor difference of 100 femtoseconds at impact means about 30 microns diference between 2 gold bullets – and this 30 microns will be much more than enough to miss the uniform compression of diamond sphere target. Don’t forget that nuclear laser finally is a picoseconds event and practically will be near to impossible to get ALL 2,432 chemical explosives events inside a very precise window of 14 picoseconds – the diference between 2 SARATOV lasers should be less 10 miligrams in weight  – and explosives lens used should be at no more than 1 miligram diference each other. That means the SARATOV lasers required high engineering high precision of collimation and very high precision of collateral electrical discharges,

What will be the price of PROIEKT GROM KAMEN ?

Each SARATOV laser will cost around 58,000 euro each – that means abt 140 mil euro all together (Sept 2104 Russia costs of manpower and some materials – all lasers built at industrial scale for at least 25 shots per year).Of course cheaper versions of lasers can be used – especially D/T nuclear lasers could be even if  4 times cheaper – but the 14,1 Mev – 52,000 km/s neutrons will ofer less power and less perspectives for high-energy experiments. Also and advanced version of laser used in PROIEKT GAGARIN can be used hereby with dramatically drop in costs and with little decreasing of overall performance.

One mirror will cost 1,4 mil euro each – that means 4.4 billion euro all together (German cost of manpower and materials – June 2014). Each mirror is consider to resist at least 40 “shots” before full protective recoating and re-aluminization. The transparent ceramics of mirror blanks of course will remain intact and ready to be used thousand of shots.

The quality of this mirrors regarding precision of focusing unfortuneteley should be “astronomical” grade precision.

Of course the “classical” mirrors could be easily replaced and with better results by ….. Wolter Type 1 multilayer mirrors ….. which will bring the advantage of grazing reflection of X / gamma rays and also the huge advantage of much more power released. In fact by using this incredible lens the power released cooudl increase by a factor of x40 and thus a micro black hole can be obtained. Of course the price of this mirrors will increase the overall cost of the project – each Wolter type 1 mirror will cost at least 5 million euro – Nipon prices of July 2014.

This project allowed physician’s allround the world not only to run ANY fusion or fission experiment ….. but also to run any desire experiment form Superstrong field science ……. Practically all possible transuranic elements up to Oerstedium 1089 can be obtained. Of course much much cheaper experiments are available to obtain mostly of these transuranic elements – the main one being The SEABORG Experiment!  By running diferent configurations inside PROIEKT GROM KAMEN we can obtain all 4 types of GeV scalar bosons allowed by Standard Model and by non-abelian gauge theory namely Higgs, Ulianov, Vinod and Herod bosons. Such experiments will accelerate so fast the matter thus we can expect strong positrons emission and other nonlinear quantum electrodynamic (QED) processes.

For example relativistic gold bullets can hit and compress a tiny disk of aluminium up to detonation of aluminium………. or the diamond sphere can be replaced by an “onion sphere” like that – thalium layer + aluminium layer + inner gold sphere …… and so on.

Mainly four types of focusing of energy can be used inside Proiekt GROM KAMEN:

• the 14,1 Mev neutrons are directly focused over a spherical target disposed in the geometrical center of inner concrete chamber,
• the gamma rays are converted into nano-metrical rays and focused over a spherical hollow target disposed in the geometrical center of inner chamber . The SHG system is used then in order to accelerate to the speed of light the foil target,
• inside special barrels the gamma rays are accelerating up to the speed of light a tinny gold plasma bullet for a 12 femtoseconds releasing of energy by impact which is focused by thousand of mirrors over a target disposed in the center of inner concrete chamber
• both gamma rays and neutrons are compressing inside special advanced barrels different type of gases directly to the center of inner chamber or by using as an intermediary step an advanced nuclear Voitenko compressor.

In fact a myriad of experiments can be run inside this novel project! Just like that – only our imagination will be the limit of our civilization when we will run experiements inside the amazing spherical chamber of GROM KAMEN project!

Proiekt GROM KAMEN clearly is one of the most versatile and the most powerful machine suitable for deep search of matter and Universe!